Howard | Medical
Welcome Battery Status Indicator Bifocal Friendly Work Surface Height Adjustment Steering Handle Cable Management Keyboard Tray Battery Compartment Locking Casters
Request a demo
The following features are available on all models:
  • Casters | durable precision casters, 2 locking (front) 2 swivel (rear)
  • Power Cord | commercial grade power cord
  • Cord Hanger | used to store the cord within easy reach
  • Lift Mechanism | powerful yet quiet and smooth-operating motorized lift mechanism
  • One Touch Height Adjustment | adjust the worksurface over a wide range of comfortable working heights, both sitting or standing
  • Keyboard Tray | slide-out keyboard snaps into place for both in and out positions
  • Mouse Surface | extracts to either side for right and left-handed users
  • Steering Handle | convenient 270° handle lets you maneuver the cart
  • Work Surface | one of the largest work surfaces in the industry
  • Notebook/PC Compartment | houses and protects your computer and its associated cabling
PC Compartment (under work surface) - 16"W x 16.5"D x 1.88"H
Work Surface Area - 2ft² approximately
Work Surface Height - 13.75" to 46.5" adjustable 14.63
Footprint (base) - 17.25"W x 20" deep C-C
Keyboard Tray - 18"W x 7.25"D x 1.8"H
Mouse Surface - 6.38"W x 7"D positionable to right or left side
Temperature (ambient) - 41°F - 90°F (5°C - 32°C)
Humidity - 0 - 95% (non-condensing)
Cooling - Free-air convection
* Do not block or obstruct vents on cart body or base.
Water and dust resistance IPXO
Accessory Plate
Accessory Pole
Extended Accessory Mount (side)
Extended Accessory Mount (rear)
Articulating Arm
Howard LCD Arm
For a monitor or All-in-One Unit
  • Industry-standard 75mm and 100mm VESA mounting patterns
  • Titls -10° and +45°
  • Designed for flat-pannel monitors and all-in-one computers up to 14lbs
  • Easy to use, torque-assisted design requires no adjustment or clamps
          to reposition the monitor
  • Bifocal view
  • Internal cable management hides and protects cables
  • Durable cast aluminum construction
For a projector or document scanner
  • Industry-standard 3/4" pole mount or 75mm/100mm VESA pattern
  • Swivels to either left or right side of cart for convenient use
  • 12" vertical adjustment range (raise and lower along with cart's
          motorized lift)
  • Supports devices up to 15 lbs
  • Durable cast aluminum construction
Lift Mechanism
Operating Voltage - 12VDC nominal (18VDC max)
Operating Current - 3.8A typical at 30 lb load
7.8A at maximum load

Stroke - 14.63 inches
Duty Cycle - 10% long-term maximum 6 min. per hour or 2 min.
continuous at full load

Thrust - Maximum 180 lbs-force (800N)
Safety - Self-locking (no power required) Overcurrent protected
Bending Moment - Static: 996 pound feet (1350 Nm) max
Dynamic: 111 pound feet (150 Nm)

Performance - Low-noise
* Soft start and soft stop for minimal vibration

Exterior Panels
Material - high-strength compressed structural foam and glass-
filled nylon

Flame rating - Minimum UL recognized 94V-2 Typical 94V-1
About Us             Contact Us             Terms of Use           Privacy Policy             Eval Request             Careers             Site Map
(877) 856-6441   |   (601) 399-5060 (fax)   |   Email   |   © 2000-2018 Howard Medical is a division of Howard Industries Inc.